| General Features | | |
| AFR – Automatic Feature Recognition – Holes | | |
| AFR – Automatic Feature Recognition – Pockets, Boss | | |
| AFR – Automatic Feature Recognition – Turn | | |
| KBM – Knowledge Based Machining | | |
| Automatic Recognition of Multiple Setups | | |
| Indexing of the 4th & 5th axes including tombstone | | |
| Sorting of the Operations | | |
| Toolpath Simulation | | |
| Step Through Simulation | | |
| Tolerance Based Machining – C# macro | | |
| Assembly Machining | | |
| CAMWorks Configurations | | |
| Stock and Work in Process Models | | |
| Setup Sheets – XML, XMLT, MDB | | |
| e-Drawings Publisher | | |
| Universal Post Generator (UPG)* | | |
| CAMWorks Library Features (supports only 2.5x features) | | |
| Import / Export of CAM data | | |
| MES Feed Speed Library | | |
| *Ancillary applications installed separately |
| 2.5x Milling Features |
| Interactive Feature Creation | | |
| Rough Milling | | |
| Face Milling | | |
| Face Milling | | |
| Center Dilling | | |
| Countersinking | | |
| Bore | | |
| Ream | | |
| Tap | | |
| Thread Milling | | |
| Engraving | | |
| 3x Milling Features |
| Multi-surface feature creation | | |
| Area Clearance | | |
| Z Level | | |
| Contain and Avoid areas and features | | |
| Turning Features | | |
| Face Rough | | |
| Face Finish | | |
| Rough Turn | | |
| Finish Turn | | |
| OD Threading | | |
| Cut-off | | |
| Groove Rough | | |
| Groove Finish | | |
| Bore Rough | | |
| Bore Finish | | |
| Center Drill – on center | | |
| Center Drill – on center | | |
| Tap – on center | | |
| ID Threading | | |
| Extra – Features | | |
| High-Speed Machining | | |
| NC Editor | | |
